- Posts: 60
COMMUNITY FORUM
Error 500 no K2 Front-end after Upgrad for Joomla 3.6
- carlostegs
- Topic Author
- Offline
- Senior Member
Less
More
7 years 9 months ago #156518
by carlostegs
Replied by carlostegs on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
Krikor hello!
The extensions that use a search I did on the site are:
Josetta - K2 Categories
Josetta - K2 Items
Search - K2
System - K2 nocache pagebreak
Accelerator for K2 system
System - K2
User - K2
They are the same that were on the site before upgrading to Joomla 3.6 and Joomla prior to 3:51 did not have any kind of problem.
The problem is now with Joomla 3.6 and K2 v2.7.0
Think I better off some of them if you can show me what I will do without problems.
As for what I have not spoken on the site and not know her.
I did some tests and hung up the Accelerator for K2 and even with it disabled the problem persists of images.
I disabled also System - K2 nocache pagebreak and even with both this and the previous disabled the problem continues, ie K2 v2.70 capture an image of the automatic order system.
In tests I notice that only occurs when saving the matter for the first time to remove the picture and then saved again this no longer occurs only with that matter.
But every new matter to put the problem repeats itself, ie it puts an image without I ask nothing.
I await any suggestions your
Thank you so much
A hug
Success
Jose Carlos
The extensions that use a search I did on the site are:
Josetta - K2 Categories
Josetta - K2 Items
Search - K2
System - K2 nocache pagebreak
Accelerator for K2 system
System - K2
User - K2
They are the same that were on the site before upgrading to Joomla 3.6 and Joomla prior to 3:51 did not have any kind of problem.
The problem is now with Joomla 3.6 and K2 v2.7.0
Think I better off some of them if you can show me what I will do without problems.
As for what I have not spoken on the site and not know her.
I did some tests and hung up the Accelerator for K2 and even with it disabled the problem persists of images.
I disabled also System - K2 nocache pagebreak and even with both this and the previous disabled the problem continues, ie K2 v2.70 capture an image of the automatic order system.
In tests I notice that only occurs when saving the matter for the first time to remove the picture and then saved again this no longer occurs only with that matter.
But every new matter to put the problem repeats itself, ie it puts an image without I ask nothing.
I await any suggestions your
Thank you so much
A hug
Success
Jose Carlos
Please Log in or Create an account to join the conversation.
- Krikor Boghossian
- Offline
- Platinum Member
Less
More
- Posts: 15920
7 years 9 months ago #156530
by Krikor Boghossian
JoomlaWorks Support Team
---
Please search the forum before posting a new topic :)
Replied by Krikor Boghossian on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
This is the behaviour of a K2 plugin, we will find the culprit.
Did you install at any point this plugin github.com/getk2/k2-iaki ?
Is the image pulled from other K2 items or from the WYSIWYG editor?
Can you check in the content plugins?
Did you install at any point this plugin github.com/getk2/k2-iaki ?
Is the image pulled from other K2 items or from the WYSIWYG editor?
Can you check in the content plugins?
JoomlaWorks Support Team
---
Please search the forum before posting a new topic :)
Please Log in or Create an account to join the conversation.
- carlostegs
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 60
7 years 9 months ago #156532
by carlostegs
Replied by carlostegs on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
! Krikor Hello
The images are placed K2 v.2.70 other materials, ie they are images that were used in other materials previously posted
So caught my attention the problem.
I have arrived to disable all plugins and even turning off all the problem continues to occur to seek the image.
I look forward possible suggestions
thank you so much
success
Jose Carlos.
The images are placed K2 v.2.70 other materials, ie they are images that were used in other materials previously posted
So caught my attention the problem.
I have arrived to disable all plugins and even turning off all the problem continues to occur to seek the image.
I look forward possible suggestions
thank you so much
success
Jose Carlos.
Please Log in or Create an account to join the conversation.
- carlostegs
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 60
7 years 9 months ago - 7 years 9 months ago #156533
by carlostegs
Replied by carlostegs on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
! Krikor Hello
supplementing
He had understood about the iaki, it seems that it is a tool (plugin) from inside the K2.
IMPORTANT: In our system there is no such iaki installed, just look around the k2
This link you sent, I install this iaki that sent as suggestion is that?
I await guidance
thank you
success
Jose Carlos
supplementing
He had understood about the iaki, it seems that it is a tool (plugin) from inside the K2.
IMPORTANT: In our system there is no such iaki installed, just look around the k2
This link you sent, I install this iaki that sent as suggestion is that?
I await guidance
thank you
success
Jose Carlos
Last edit: 7 years 9 months ago by carlostegs. Reason: translation
Please Log in or Create an account to join the conversation.
- carlostegs
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 60
7 years 9 months ago #156536
by carlostegs
Replied by carlostegs on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
Krikor hello!
Problem solved!
As I did not have that aki
I was only install iaki the problem disappeared.
Thank you thank you
success
Thank you again
Jose Carlos
Problem solved!
As I did not have that aki
I was only install iaki the problem disappeared.
Thank you thank you
success
Thank you again
Jose Carlos
Please Log in or Create an account to join the conversation.
- Krikor Boghossian
- Offline
- Platinum Member
Less
More
- Posts: 15920
7 years 9 months ago #156537
by Krikor Boghossian
JoomlaWorks Support Team
---
Please search the forum before posting a new topic :)
Replied by Krikor Boghossian on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
Actually IAKI can cause this issue.
Let me know if you run into any new issues.
Let me know if you run into any new issues.
JoomlaWorks Support Team
---
Please search the forum before posting a new topic :)
Please Log in or Create an account to join the conversation.
- carlostegs
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 60
7 years 9 months ago #156538
by carlostegs
Replied by carlostegs on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
Krikor HELLO!
I want to make a suggestion for K2 next updates.
In Basic articles Edit screen, should put the dates in this Tab 2 Publishing and Metadata
We've posted over 300 articles per day, we believe that leaves much faster if you have everything on one page., As it was in version 2.69 of k2.
It is a suggestion.
Thanks for all support you gave us.
Our thanks
a hug
much Success
Jose Carlos
I want to make a suggestion for K2 next updates.
In Basic articles Edit screen, should put the dates in this Tab 2 Publishing and Metadata
We've posted over 300 articles per day, we believe that leaves much faster if you have everything on one page., As it was in version 2.69 of k2.
It is a suggestion.
Thanks for all support you gave us.
Our thanks
a hug
much Success
Jose Carlos
Please Log in or Create an account to join the conversation.
- Krikor Boghossian
- Offline
- Platinum Member
Less
More
- Posts: 15920
7 years 9 months ago #156556
by Krikor Boghossian
JoomlaWorks Support Team
---
Please search the forum before posting a new topic :)
Replied by Krikor Boghossian on topic Error 500 no K2 Front-end after Upgrad for Joomla 3.6
Hello Jose Carlos,
Can you make this suggestion in our repo github.com/getk2/k2 so we can evaluate it and more users can jump into the discussion?
Can you make this suggestion in our repo github.com/getk2/k2 so we can evaluate it and more users can jump into the discussion?
JoomlaWorks Support Team
---
Please search the forum before posting a new topic :)
Please Log in or Create an account to join the conversation.